
Used Machinery
ALL Used
Machinery
Used
Air Compressors
Used Autobrakes / Sheet Metal Folders
Used Bar Folders
Used
Sheet Metal Brakes
Used Cheek Benders
Used
Cleat Benders / Cleat Folders
Used
Clincher / Fasteners
Used Coil Lines
Used
Crimping / Beading / Rotary Machine
Used Drill Press
Used
Duct Beading Machine
Used
Duct Insulation Liner Cutters
Used
Flangers / Flanging Machines
Used
Gorelockers / Elbow Machines
Used Grinders
Used HVAC Accessories
Used
HVAC Duct Insulation Pin Spotters
Used
Ironworkers
Used
Laser Cutting Machines
Used
Mechanical Piping Equipment
Used Notching
Machines
Used
Pittsburgh Seamers
Used Plasma
Cutting Machines
Used Press Brakes
Used Punching
Machines
Used
Sheet Metal Rolls
Used Roll Formers
Used
Saws
Used Sheet
Metal Shears
Used
Sheet Metal Slitters
Used
Spiral Machines
Used
Welders
|
Used Sheet Metal Equipment For Sale
Please
Scroll Down To View All Of Our Used Machines
To Search By Used Sheet
Metal Equipment Item Number:
1332
| 1343
| 1578 | 1580
| 1603PX | 1609 | 1610 | 1611 | 1616 |1619 | 1621 | 1622 |1623 | 1624 | 1626 | 1627 | 1628 | 1630 | 1631 | 1632 | Eng-1633 | Eng-1634 | Eng-1635 | 1636
CINCINNATI Precision Machinery
offers a variety of used sheet metal fabrication machinery. Take
a look at our Used Sheet Metal Equipment page
often. We are always updating our site with different used sheet
metal fabricating machinery. We have everything from used coilines,
used hand tools, used hvac acessories and used sheet metal brakes,
to used sheet metal shears.
If you have any questions, please call 513-860-4133
If you have any Used Sheet Metal Machinery
for sale and would like us to post them on our website, please
Contact Us and we will be
happy to assist you.
Air Compressors
Used
Ingersoll Rand Rotary Screw Air Compressor - Model U15H-SP |
|
Price - $2,000.00
Item #1332
- Manufacturer: Ingersoll Rand
- Rotary Screw Air Compressor
- Model: U15H-SP
- Serial No: K3606U86
- Electrics: 200 V/ 3 PH
- Capacities: 15 HP, 125 PSI, 39 CFM
- No Tank Required
- 3500 Hours on Meter
- Quiet Continuous Run
- Was Used To Run A Sheet Metal Shop
- Approx. MFG. Date: 1986
- Approx. New List Price: $9,000.00
- Location: CPM Warehouse
Return to TOP
|
Sheet Metal Autobrakes / Sheet Metal Folding Machines
Used
RAS Turbo Bend Plus Folding Machine - Model RAS62.30 |
|
SOLD
Item # 1599RAS
- Manufacturer: RAS
- Approx. Mfg. Date: 2013
- Model: RAS62.30
- Capacities: 10' X 14 Gauge Sheet Metal
- Electrics: 208/3PH, Comes W/ A Converter As Standard
- Working Length: 125.9"
- Backgauge depth: 0.24" - 61"
- Backgauge Accuracy: +/- 0.006"
- Upper Beam Height Open Max: 7.87"
- CNC Folding Beam Adj. Max: 0.2"
- Working Height: 33.5"
- 72.5 PSI Air Pressure
- Touch Screen Control
- seller Also Has a RAS 10' 14 Ga Shear For Sale -- Will
Make A Package Deal For Both!
- Dimensions: 170" X 83.7" X 54.5"
- Approx. Weight: 7,700 LBS
- Location: OFFSITE
Return to TOP
|
Sheet Metal Bar Folders
Used
Pexto 36" Bar Folder - Model 055D Pexto |
|
Price - $1,200.00
Item#1603PX
- Model: 055D Pexto
- Max. Folding length: 36"
- Capacity: 20 gauge
- Backgauge Adjustment: 1/8" - 1"
- Max. Round Fold Diameter(For Wire): 3/8"
- Comes with Stand
- approx. shipping weight : 485 lbs.
- Dimensions: 50" X 30" X 11"
- Approx. New list price : $5,238.00
- Location : OFFSITE
Return to TOP |
Sheet Metal Brakes
Used Tinsmith Portable Sheet Metal Brake
|
|
Price - $300.00
Item #1630
- Used Tinsmith Portable Sheet Metal Brake
- Manufacturer: Tinsmith Brake
- Model: R-1333
- Vintage Sheet Metal Bending Brake
- Great For Using As a Cheek Bender
- Open Ends
- Can Form Hems on Sheet Metal
- Sheet Metal Crafter
- Capacities: 30" X 20 Ga Sheet Metal
- Approx. Weight: 30 lBS
- Dimensions: 36"L x 10"W x 8”H
- Location: CPM Warehouse
Return to TOP
|
Used
4' X 22 Gauge Box & Pan Brake |
|
Price - $800.00
Item #1609
- Model: 422
- Capacities: 48" X 22 Ga Mild Steel
- Maximum Box Depth - 3"
- 422 Finger Brake
- Includes New Stand
- Will Ship With Stand Broken Down
- Approx. New List Price: $1,200.00
- Approx. Weight: 400 lBS
- Dimensions: 64"L x 28"W x 32”H
- Location: CPM Warehouse
Return to TOP
|
Sheet Metal Cheek Benders
Used
Manual Cheek Bender |
|
Price - $400.00
Item #1623
- Manufacturer: Lockformer - Possibly
- Model: #20 Manual Cheekbender Machine
- For bending inside cheek 90?flange for square to round ductwork fittings
- Includes Optional Stand
- Capacities: 24" X 20 Ga
- Approx. Dimensions: 30" x 12" x 10" (machine only) 38" x 32" x 40" (w/stand)
- Approx.Weight: 100 Lbs
- Approx. New List Price: $900.00
- Location: CPM Warehouse
Return to TOP |
Cleat Benders - Manual
We Currently Do Not Have
Any Used Sheet Metal Cleat Benders. Please Check Back Or
Contact Us And Our
Sales Staff Can Assist You In Finding A Used Sheet Metal
Cleat Bender.
Return to TOP |
Cleat Benders/Folders - Powered
Used
Engel Power Cleat Bender Machine |
|
Price - $3,000.00
Item #1624
- Engel Power Cleat bender Machine
- Manufacturer: Engel Industries
- Model: CB24 Power Cleatbender
- Turns the drive on HVAC Metal Ductwork
- Can turn Cleat hem on pre-formed "L" shaped duct
- Has fold up extention table for longer pieces
- 31" working height
- Capacity: 24" X 20 gauge max sheet metal
- Electrics: 110V 1 PH
- Approx. Dimensions: 36"H X 45"W X 48"L
- Approx. Weight: 600 lbs
- New List Price: $7,000.00
- Location: CPM Warehouse
Return to TOP
|
Used
Lion Model 1836 Power Cleat Bender Machine |
|
Price - $6,500.00
Item #1632
- Pneumatic Powered Sheet Metal Cleatbender to put cleats
on ductwork
- Manufacturer: Lion
- Model: 1836
- Capacities: 18 Ga X 36" Wide Mild Steel
- Air: 100 PSI
- Bends Drive On Ductwork
- Approx. Dimensions: 40"D X 47"W X 34"H
- Approx. Weight: 1,100 LBS
- Approx. New List Price: $14,000.00
- Location: CPM Warehouse
Return to TOP
|
Clinchers / Fasteners
Iowa Precision Cornermatic Model CM-F-DH TDF Dual Head Corner Machine |
|
Price - $20,000
Item #Eng-1634
- Used Engel Cornermatic TDF Dual Head Corner Machine
- Manufacturer: Iowa Precision/ Engel Industries
- Model: CM-F-DH TDF Dual Head Cornermatic Machine
- Capacities: 5' x 18 Ga. Sheet Metal
- Electrics: 110V/1PH & Pneumatic
- Air Required: 110 PSI
- Original Manual Available
- A Pit In The Floor Is preferred
- For putting TDF corners on rectangle ductwork 18ga. - 26ga.
- Approx. Dimensions: 24 1/8" X 24 1/8" X 116"
- Approx. Weight: 1,800 Lbs
- Approx. New List Price: $36,000.00
- Location: Offsite
Return to TOP
|
Coil Line Machines
Used
Engel Shopmaster Coiline Table |
|
Price - $20,000
Item #Eng-1633
- Manufacturer: Engel Industries
- Model: Engel Shopmaster Coiline
- Capacity: 4' x 16 Ga
- Motor: 5HP
- 3 Coil Cradles
- CDA to power feed Coils
- Coil Selector Station
- Five roll straightener - hydraulic
- Beading Station
- Shopmaster Table to cut to length
- Can slit the width as well on shopmaster
- Can add a notcher at the end of shopmaster
- Has both magnets on shopmaster table
- Electrics: TBD
- Dimensions: TBD
- Weight: TBD
- Location: OFFSITE
Return to TOP
|
Used
Vicon Machinery 5’ Shear & Bend Coil Line |
|
SOLD
Item #1507LM
- Manufacturer: Vicon
- Approx. Mfg Date: 2009
- Electrics: 230v/440v/3PH - Wired For 230V
- Decoilers: 4 - 12,000LB 60” Capacity Decoilers
- Underfed
- Two Additional Coil Spool Holders
- Hydraulic Coil Drive Unit
- Roller Tracking Guide System for Coil Feed
- 18 ga. Capacity Straightener, Beader,
Hydraulic Notching for TDX and S&Drive
- 16 ga. Mild Steel Shear/Brake with 4 sided
blades
Brake has the option to bend Male Snaplock and/or Male
Pittsburgh
- Dual Head S&Drive Cleat Edge Former (Unit
installed between the notcher and the shear)
- Minimum Cleat Edge is 4”
- Vicon Computer Control System with Cabinet
- Approx. New List Price - $230,000.00
- Location: OFFSITE
Return to TOP
|
Used
Engel 5’ HVAC Coil Line |
|
SOLD
Item #1512
- Manufacturer: Engel
- Approx. Mfg Date: 2000
- Capacity: 16 - 18 Ga
- Electrics: 230v/480v/3PH - Wired For 480V
- Decoilers: 4 - 5' Underfed, 10,000 Lbs. Capacity
- 4 Extra Decoilers / Spools
- Shear, Notch, Bead
- Snaplock / Pittsburgh Rollformer Transfer System
- Dual Head Cleatformer FOr "S" &
Drive
- Dual Head TDF Rollformer
- Full Wrap Brake
- No Insulation
- Requires Aire
- Currently Available For Demo
- Available In Spring When New Coiline Arrives
- Weight: By Section
- Approx. New List Price - $600,000.00
- Location: OFFSITE
Return to TOP
|
Sheet Metal Crimping / Beading / Rotary Machines
Used
Roper Whitney / Pexto Power Rotary Spin-In Collar Machine
- Model CE-300 |
|
SOLD
Item #1582
- Manufacturer: Roper Whitney / Pexto
- Model: CE-300
- Electrics: 120V / 1 PH / 60Hz
- capacities: 22 - 30 Gauge Soft Steel
- Roll Speed: 78 RPM
- Min. Diameter: 5"
- Roll Diameter: 3"
- Motor: 1/2 HP
- Magnetic Starter
- Automatic Roll Start & Stop
- Forms A Deep Draw Spin-In Pocket On A Round Collar
- Similar To Harper Metal Products Model SP-90 Spin-In
Collar Machine
- approx. dimensions: 21"L x 17"H x 50"W
- approx. weight: 330 lbs
- approx. new list price: $6,000.00
- Location: CPM Warehouse
Return to TOP |
Drill Press Machines
We Currently Do Not Have
Any Used Drill Press Machines. Please Check
Back Or Contact Us And Our
Sales Staff Can Assist You In Finding A Used Drill Press Machine.
Return to TOP |
Duct Beading Machines
Used
Lockformer Duct Beader Machine - Model 1660 |
|
SOLD
Item # 1566
- Manufacturer: Lockformer
- Model: 1660
- Electrics: 115V / 1PH
- Capacities: 16 Ga X 5' W
- Eliminates Cross Braking
- Stiffens Ductwork in Seconds
- Dimensions: 43" L X 70" W X 33" H
- Approx. Weight: 1,650 LBS
- Approx. New List Price: $7,000.00
- Location: CPM Warehouse
Return to TOP
|
Duct Insulation Cutting Machines
Used
Duro Dyne Power Liner Sizer - Model PLS |
.jpg)
|
SOLD
Item#1521
- Manufacturer: Duro Dyne
- Model: PLS - Power Liner Sizer
- Electrics: 110 volt
- air requirements: 150 pSI Max
- Capacities: Insulation From 1 1/2" to 2" X
5' Wide
- Insulation Cutter
- High Production - 40 Linear Ft Per Minute
- Includes: 1 Crosscut Blade & 2 Blades For Cutting
The Width
- Dimensions: 111" X 37" X 61"
- Weight: 700 LBS.
- Approx. New list price: $13,000.00
- Location: CPM warehouse
Return to TOP
|
Flangers / Flanging Machines
Used
Lockformer 16 Gauge Power Flanger |
|
SOLD
Item #1577
- Manufacturer: Lockformer
- Electrics: 115V / 1 PH
- capacities: 16 gauge Mild Steel
- 3/8" Flange Height
- Auto-Guided - Automatically Follows any Edge, Curved
or Straight
- 18 FPM
- 3/4 HP
- approx. dimensions: 24" x 24" x 34"
- approx. weight: 300 lbs
- approx. new list price: $5,900.00
- Location: CPM Warehouse
Return to TOP
|
Gore Lockers / Elbow Machines / Fitting Machines
We Currently Do Not Have
Any Used Gore Lockers / Elbow Machines / Fitting Machines. Please Check
Back Or Contact Us And Our
Sales Staff Can Assist You In Finding A Used Gore Locker / Elbow Machine / Fitting Machine .
Return to TOP |
Sheet Metal Grinders
We Currently Do Not Have
Any Used Sheet Metal Grinders. Please Check Back Or Contact
Us And Our
Sales Staff Can Assist You In Finding A Used Sheet Metal
Grinder.
Return to TOP |
HVAC Accessories
We Currently Do Not Have
Any Used HVAC Accessories. Please Check
Back Or Contact Us And Our
Sales Staff Can Assist You In Finding Used HVAC Accessories.
Return to TOP |
HVAC Duct Insulation Pin Spotters
Used
Compact Duro Dyne Weld Pinspotter Machine - Model MFPT |
|
Price - $2,000.00
Item #1636
- Manufacturer: Duro Dyne
- Model: MFPT
- Capacities: Up To 2" Thick insulation
- Electrics: 220V/1 PH
- 10 KVA
- For Welding Pins Through Insulation To Metal Ductwork
- Hand Held Portable
- Clip pins Are Permanently Welded In to Position -
Flush with The Insulation
- Approx. Weight: 85 lBS
- Dimensions: 12"H x 8” W x 22” L
- Location: CPM Warehouse
Return to TOP |
Used
Duro Dyne Rolling Head Pinspotter Machine |
|
Price - $6,500.00
Item #1616
- Manufacturer: Duro Dyne
- Rolling head pinspotter Machine
- Model RH
- Electrics: 220V / 1 PH
- Handles up To 2" Liner
- Vibrating Bowl Handles 1/2" to 1 1/2" Fasteners
- Has a Notch For TDF & TDC Flange
- Weld Pinner
- machine Welds Fastening Pins to Hold Insulation to
Sheet Metal Ductwork
- Approx. New List Price: $19,000.00
- Approx. Weight: 920 lBS
- Dimensions: 83" X 34" X 61"
- Location: CPM Warehouse
Return to TOP |
Ironworkers
We Currently Do Not Have
Any Used Ironworkers. Please Check
Back Or Contact Us And Our
Sales Staff Can Assist You In Finding A Used Iron Worker.
Return to TOP |
Laser Cutting
Machines
We Currently Do Not Have
Any Used Laser Cutting Machines. Please Check
Back Or Contact Us And Our
Sales Staff Can Assist You In Finding A Used Laser Cutting Machine.
Return to TOP |
Mechanical Piping Equipment
We Currently Do Not Have
Any Used Mechanical Piping Equipment. Please Check
Back Or Contact Us And Our
Sales Staff Can Assist You In Finding Mechanical Piping Equipment.
Return to TOP |
Sheet Metal Notching Machines / Notchers
Used
Engel Air Powered Sheet Metal Duct Notching Machine - Model
10LM-AP |
|
SOLD
Item # 1375
- Manufacturer: Engel
- Model: 10LM-AP
- 5 Heads For Full Wrapped Duct Or "L" Shaped
Ductwork
- Capacities: 10' X 18 Gauge Mild Steel
- Electrics: 110V/1 PH
- Pneumatic/Air Powered
- Residential Notch Pattern
- Approx. Dims: 144"L X 52"W X 52"H
- Approx. Weight: 1,875 LBS.
- Approx. New List Price: $11,000.00
- Location: CPM Warehouse
Return to TOP
|
Pittsburgh Seamers - Powered
Used
Engel Pittsburgh Seam Closer Whisper Loc Machine - Model M-516PS-V |
|
Price - $18,000
Item #Eng-1635
- Manufacturer: Engel Industries
- Model: M-516PS Seam Closer
- Electrics: 480V / 3PH
- capacities: 5' x 16 Gauge Sheet Metal
- For Closing Pittsburgh Seam On Rectangle Ductwork quietly and accurately
- Similar to IPI Whisper Loc Machine
- Close Seam on 4 & 5 Foot HVAC Duct
- 5 HP
- Hydraulic Powered
- Floor Mounted - A pit In The Floor Is Preferred
- approx. dimensions: 36"L x 117"H x 36"W
- approx. weight: 1800 lbs
- approx. new list price: $36,000.00
- Location: Offsite
Return to TOP
|
Plasma Cutting Tables / Machines
Used
Lockformer Vulcan Plasma Cutter - Model 1000B |
|
SOLD
Item # 1554
- Manufacturer: Lockformer
- Approx. Mfg Date: 2011
- Model: 1000B
- Electrics: 208V / 3PH
- 120 psi
- Hypertherm Max Plasma Torch
- Vulcan XP & VS Control - Software loaded on the
included Computer (Licensing Through Lockformer - Not
Included)
- Approx. Weight: 3,500 Lbs
- Dimensions: 11'L X 6' W X 4' H
- Approx. New List Price: $50,000.00
- Location: CPM Warehouse
Return to TOP
|
Sheet Metal Press Brakes
We Currently Do Not Have
Any Used Sheet Metal Press Brakes. Please Check
Back Or Contact Us And Our
Sales Staff Can Assist You In Finding A Used Sheet Metal
Press Brake.
Return to TOP |
Sheet Metal Punching Machines
We Currently
Do Not Have Any Used Punching Machines. Please Check Back
Or Contact Us And Our
Sales Staff Can Assist You In Finding A Used Punch Machine.
Return To TOP |
Sheet Metal Rolls
Used
Lown 5' 10 Ga Power Metal Plate Roll - Model G500 |
|
SOLD
Item # 1258J
- Manufacturer: Lown
- Model: G500
- Electrics: 208/3 PH
- Capacities: 5' X 10 Ga
- 3 Roll Plate Roll
- Power
- Weight: 3,600 LBS.
- Approx. New List Price: $16,000.00
- Location: Offsite
Return To TOP
|
Sheet Metal Roll Forming Machines
Used
Lockformer TDC Rollforming Machine
|
.JPG)
See More Pictures and Video:
Used Lockformer TDC Roll Former
|
Price - $22,000.00
Item #1619
- Used Lockformer TDC Rollformer
- Manufacturer: Lockformer Manufacturing Company
- Model: TDC Sheet Metal Roll forming Machine
- Transverse Duct Connector Rollformer For Connecting Rectangular Duct Sections Together
- Capacities: 18-24 Ga TDC / 22 Ga Clip Rolls / 20-22 Ga for Nexus Rolls
- Electrics: 230V/3PH
- Motor: 10 HP
- 14 Station Rollformer Machine
- Speed: 60 FPM
- Makes Three Profiles. Includes TDC Rolls, TDC Clip & Stitch Rolls, and Nexus "J" Flange Rolls (for forming 4-bolt connector frames like ductmate "j" flange and ward flange
- Chain Driven Clip
- Hinged Top For Easy Access
- TDC Small Parts Feeder
- Approx. Dimensions: 144"L X 36"W X 48"H
- Approx. Weight: 3,000 Lbs
- Approx. New List Price: $80,000.00
- Location: CPM Warehouse
Return to TOP |
Used
Engel TDF Rollforming Machine W/ Standing S
|
.JPG)
See More Pictures and Video:
Used Engel TDF Roll Former
|
Price - $18,000.00
Item #1631
- Used Engel TDF Roll Forming Machine W/ Standing S - Model 1640
- Manufacturer: Engel Industries
- Model: m-1640 TDF W/ Standing S
- Capacities: 18 Ga. Sheet Metal
- Electrics: 208V/3PH
- Motor: 7.5 HP
- 16 Station Rollformer
- Speed: 75 FPM
- Engel's TDF Machine Forms An Integral Flange On Straight
Duct & Fittings For Connecting Duct Together
- Optional Standing S Cleat Included
- Optional Standing Seam Included
- Approx. Dimensions: 135" X 45" X 53"
- Approx. Weight: 3,000 Lbs
- Approx. New List Price: $50,000.00
- Location: CPM Warehouse
Return to TOP |
Used
Lockformer Pittsburgh Roll Forming Machine - 22 Ga. with Auto Flanger
|
.JPG)
See More Pictures and Video:
Used Lockformer 22 Ga. Pittsburgh Roll Former
|
Price - $3,500.00
Item #1626
- Used Lockformer Pittsburgh Rollformer - 22 Ga. With Auto Flanger
- Manufacturer: Lockformer
- Model: Pittsburgh 22 Roll Forming Machine
- Very Nice Running Machine
- Power Flanger Attatchment Included
- Pipe Lock/ Acme Lock Included
- 5/16" Pocket
- 25 FPM
- Electrics: 110V / 1 PH
- capacity: 22-28 gauge Sheet Metal
- Approx. dimensions: 36"L x 16 1/2"W x 42"H
- approx. weight: 300 lbs
- approx. new list price: $6,000.00
- Location: CPM Warehouse
Return to TOP |
Used
20 Ga Lockformer Drive Turn Hemming Roll Forming Machine
|
.JPG)
See More Pictures and Video:
Used Lockformer Drive Turn Hemming Roll Former
|
Price - $6,500.00
Item #1578
- Drive Bender Rollformer Machine
- Manufacturer: Lockformer Rollformer
- Electrics: 240V / 3 PH
- capacities: 20 Ga Sheet Metal
- Motor: 3HP
- Skip Dent Indexing Roll With 4 pins & Control Lever
To Form Drive Hem
- Depth of Drive Hem: Approx 1/2"
- Operating Speed: 60 FPM
- Rollform every other Drive, Instead Of Using Cleatbender
To bend It
- Drive Turn Hemming Machine
- approx. dimensions: 60" x 30" x 48"
- approx. weight: 800 lbs
- approx. new list price: $16,000.00
- Location: CPM Warehouse
Return to TOP |
Used
20 Ga Lockformer Pittsburgh Roll Forming Machine |
.JPG)
See More Pictures and Video:
Used Lockformer Superspeed Pittsburgh Roll Former
|
Price
- $4,000.00
Item #1580
- Manufacturer: Lockformer
- Model: 20 SS Pittsburgh Rollformer
- Electrics: 240V / 3 PH
- capacities: 20 ga Mild Steel Sheet Metal
- Open Shafts Outboard on Other Side
- Makes Female Pittsburgh For HVAC Ductwork
- 5/16" Pittsburgh pocket
- 75 FPM
- approx. dimensions: 36" x 17" x 42"
- approx. weight: 400 lbs
- approx. new list price: $9,000.00
- Location: CPM Warehouse
Return to TOP |
Used
20 Ga Lockformer Snaplock Buttonlock Roll Forming Machine |
.JPG)
See More Pictures and Video: Used
Lockformer Male & Female Snaplock Roll Former
|
Price - $6,000.00
Item #1610
- Manufacturer: Lockformer
- snaplock rollformer / buttonlock rollformer
- Electrics: 203V / 230V / 3 PH
- capacities: 20 gauge Sheet Metal
- 20 Gauge Male & Female Snaplock Rolls
- Approx. dimensions: 59" x 25" x 43"
- approx. weight: 750 lbs
- approx. new list price: $12,000.00
- Location: CPM Warehouse
Return to TOP |
Used
Engel Roll Forming Machine W/ Male Buttonlock, Male Pittsburgh, & 3-N-1 Tap Collar - Model 825 |
.JPG)
See More Pictures and Video: Used
Engel Model 825 W/Male Snaplock, Male Pittsburgh, & 3-N-1 Tap Collar Roll Former
|
PRICE
- $7,000.00
Item #1611
- Manufacturer: Engel Rollforming Machine
- Model: 825
- Capacities: 20 Ga Sheet Metal
- Electrics: 208V/220/3PH
- 7/16" Male Buttonlock
- 7/16" Collar Lock For Rectangular ductwork Takeoff
- Male Pittsburgh For 5/16" pocket
- Approx. Dimensions: 80" X 28" X 40"
- Approx. Weight: 900 Lbs
- Approx. New List Price: $14,000.00
- Location: Offsite
Return to TOP
|
Sheet Metal Saws
Used
KAMA EV996 Bandsaw |
|
Price - $2,400.00
Item #1627
- Used KAMA EV996 Bandsaw
- Manufacturer: KAMA - Elderfield & Hall
- Model: EV996 Horizontal Metal Bandsaw
- Includes base
- Does mitre cutting
- Flood coolant system
- Blade width: .75"
- Blade Length: 75"
- Variable Speed Motor
- Vice opening up to 6-3/4"
- Electrics: 220v 1 PH (can wire for 115v)
- Cutting Capacities:
- Round:
6.75" at 90?br> 4.93 at 45? 3.14" at 60?
- Square:
6.75" X 6.75" at 90? 4.53" X 4.53" at 45?br> 2.00" X 2.00" at 60?
- Rectangle:
6.75"W X 5.90"H at 90?br> 4.33"W X 6.75"H at 45?/li>
- Approx. New List Price: $3,600.00
- Approx. Weight: 225 lBS
- Dimensions: 21"L x 24"W x 52"H
- Location: CPM Warehouse
- NEEDS NEW BLADE
Return to TOP |
Sheet Metal Shears
Used
12 Ga. Stanley Sheet Metal Unishear - Model .01 - 90212 |
|
PRICE
- $300.00
Item # 1343
- Model: .01 - 90212 Unishear
- Capacity: 12 Ga. Mild Sheet Metal
- Electrics: 115 Volts AC/DC, 6.6 Amps
- Hand Held 12 Ga. Metal Shear
- Dimensions: 15" x 7" x 1/2" tall
- Approx. Weight: 15 LBS.
- Approx. New List Price: $1,100.00
- Location: CPM Warehouse
Return to TOP |
Used Pexto Ring & Circle Shear |
|
PRICE
- $2,000.00
Item #1622
- Used Pexto 299B Ring & Circle Shear
- Manufacturer: RW Pexto, Peck, Stow, Wilcox
- Model:299B Ring & Circle Shear
- The No. 299 Circle Shear has the capacity to cut circles in 3 1/4" to 42 1/2" square 20 gauge Sheet metal blanks
- Manual Machine
- Depth of cutting head: 10"
- Depth of clamping head: 30 1/2"
- Comes with stand shown
- One end of the stand has wheels for portability
- Capacity: 20 gauge sheet metal
- Approx. Dimensions: 48"H X 66"L X 24"W (with stand)
- Approx. Weight: 300lbs
- New List Price: $5,000.00
- Location: CPM Warehouse
Return to TOP
|
Used Pexto 52" Hydraulic Shear |
|
PRICE
- $4,000.00
Item #1621
- Used Pexto 52" 16 ga. Hydraulic Shear
- Manufacturer: Roper Whitney / Pexto
- Model: 152K with Hydraulics Added
- Capacity: 52" X 16 Ga Mild Steel
- Hydraulic Sheet Metal Squaring Shear
- Electrics: 230V/3 PH
- 5 HP Motor
- 2 Front Sheet Support Arms
- Manual Backgauge
- Built To Machine Tool Standards
- Triple Action Shearing
- Foot Pedel Operated
- Approx. Weight: 1,300 LBS.
- Dimensions: 65"L x 32"W x 45"H
- Approx. New List Price: $9,000.00
- Location: CPM Warehouse
Return to TOP
|
Used
RAS Hydraulic Swing Beam Shear - Model RAS52.30 |
|
SOLD
Item # 1598RAS
- Manufacturer: RAS
- Approx. Mfg. Date: 2000
- Model: RAS52.30
- Electrics: 230V / 3PH
- Capacities: 10' X 14 Gauge Mild Steel,
- 10X18 Gauge Stainless Steel
- Rake Angle: 0.9 Deg
- SPM: 36
- Working Height: 31.5"
- Part Width For Front Material return Max: 29.5"
- Power Squaring Swing Beam Shear
- Digital Readout
- Power Backgauge
- Front Material return
- Available For Demonstration
- Seller is Upgrading to 12' Machine
- Approx. Weight: 4,300 LBS
- Dimensions: 145" X 66" X 55"
- Location: OFFSITE
Return to TOP
|
Sheet Metal Slitters
Used
16 Ga Wilder Sheet Metal Slitter - Model 1624 |
|
SOLD
Item # 1547
- Manufacturer: Wilder
- Model: 1624 Slitter
- Capacity: 16 Ga Single Wheel Slitter
- Electrics: 110V
- 24" Throat to Cut 48" Wide Metal in Half
- Adjustable Gauge Bar
- Weight: 450 LBS.
- Dimensions: 49"L x 30"W x 34"H
- Approx. New List Price: $3,200.00
- Location: CPM Warehouse
Return to TOP |
Spiral Pipe Machines
Used
Spiral Helix Spiral Pipe Machine - Model 200-H |
|
SOLD
Item # 1405TA
- Manufacturer: Spiral Helix
- Model: 200-H
- Serial No: 03000304
- Approx. MFG Date: 1998
- Capacity: 28 - 14 Ga, Up To 50" Spiral Pipe
- Electrics: 480V
- Motor: 50 HP
- Forming Heads: Even Nos. 6" - 50" (50"
is for 1/8" Double Wall)
- Slitting Head For Cut Off
- Air Pressure: 100 Max pSI For Slitter
- 2 Roll Off Tables
- Tooling is $45,000.00 New
- Weight: 9,000 LBS.
- Good Condition
- This Machine is Available For Demo
- Approx. New List Price: $200,000.00
- Location: Offsite/Consignment
Return to TOP
|
Spot Welder Machines / Welders
Used Peer Ace 20 KVA Spot Welder |
|
PRICE
- $2,500.00
Item #1628
- Used Peer Ace 20 KVA Spot Welder
- Manufacturer: Peer
- Model: 102
- Capacities: 2 Pieces of 10 Ga. metal
- Electrics: 230V/1PH
- 22-24" Arms
- Works Great
- Can plug a coolant system in or hook directly to a water line.
- Manual Foot Pedal
- Approx. Weight: 500lbs
- Location: CPM Warehouse
Return to TOP
Return to HOME Page
|
THE MATERIALS MAY CONTAIN INACCURACIES AND TYPOGRAPHICAL
ERRORS. CPM DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE
MATERIALS OR THE RELIABILITY OF ANY ADVICE, OPINION, STATEMENT
OR OTHER INFORMATION DISPLAYED OR DISTRIBUTED THROUGH THE SITE.
YOU ACKNOWLEDGE THAT ANY RELIANCE ON ANY SUCH OPINION, ADVICE,
STATEMENT, MEMORANDUM, OR INFORMATION SHALL BE AT YOUR SOLE RISK.
CPM RESERVES THE RIGHT, IN ITS SOLE DISCRETION, TO CORRECT ANY
ERRORS OR OMISSIONS IN ANY PORTION OF THE SITE. CPM MAY MAKE ANY
OTHER CHANGES TO THE SITE, THE MATERIALS AND THE PRODUCTS, PROGRAMS,
SERVICES OR PRICES (IF ANY) DESCRIBED IN THE SITE AT ANY TIME
WITHOUT NOTICE.
|
色婷婷五月色综合小说_色综合色国产热无码一_色欲色欲天天天www
|